Category: LE Series

(Results from 41 to 50)
What does alternating red and green mean on Engage lock?
The alternating red and green on the Engage locks (NDE, LE) means it is updating the firmware on the lock internally.You are unable to connect or update the device until the firmware finishes loading....
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series
On LE lock how can you lock deadbolt from outside?
You can only lock the deadbolt from the outside of the LE lock with the hard key. It cannot be thrown with credential. It can only be retracted with credential ...
Schlage Commercial » Electronic Locks » LE Series
Are the LEB or NDEB compatible with the HID Corporate 1000 credentials?
Depends on the credential, if it’s a HID prox credential both locks can read prox up to a 36 bit credential. If it’s the HID smart credential, can read the Card Serial Number (CSN). We ...
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series
What are the available plug face finishes for the NDEB and LEB locks?
The available plug face finishes for the NDEB and LEB locks are: 606, 622,626 and 643e ...
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series
What are the wifi alerts that can be enabled under a Engage site in Global settings?
When enabled, wifi alerts are used on the NDEB/LEB/CTE When a “forced door” happens the lock will connect to the wifi network and report the “forced door” alert in the audits. ...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE
What can cause the LE/LEB to unlock on the outside lever with no valid badge/credential entry. In a passive state when power is applied.
If you LE / LEB will not go into a secure state with power applied, please check the following: Check handing screw and REX switch are installed correctly and on the inside of the mortise body&n...
Schlage Commercial » Electronic Locks » LE Series
NDEB lock LED troubleshooting guide.
Please click here for the NDE-NDEB / LE-LEB lock troubleshooting guide....
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series
What is the part number for the LEBMB Mortise case?
Here are the part numbers for the different LE locks: L483-000 - Chassis with harness (MS and MB only) L483-001 - Chassis with harness (MD only) ...
Schlage Commercial » Electronic Locks » LE Series
What does no-tour mean?
The No-Tour feature allows Administrators to assign and change access rights to a lock without having to physically visit the lock to make access programming updates. Using the MT20W enrollment ...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Readers » Enrollment » MT20W | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
How can I confirm that the Engage locks are updating via WiFi overnight?
The next morning, check the audits for any WiFi events. You will see WiFi powered on and when finished WiFi power off. You will also see all the audits from the previous day. ...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE