LE not reading cards
Tips to try for a NDE/LE not reading cards
1. Ask what changed and if the cards ever worked.
2. What card model and brand are they using.
3. Try just a power...
Schlage Commercial » Electronic Locks | Schlage Commercial » Electronic Locks » LE Series
LE template
Document is available here: LE Template - Master (current as of Feb 2020)
...
Schlage Commercial » Electronic Locks | Schlage Commercial » Electronic Locks » LE Series
Where is the MAC address on the LE lock?
You can find the MAC address on the sticker under the battery holder.
The serial number is on the same sticker.
...
Schlage Commercial » Electronic Locks | Schlage Commercial » Electronic Locks » LE Series
Can you use a config card on NDE/ LE locks?
Using the Engage software, on the lock settings, you can turn on or off all the prox and smart card options.All of our configuration cards are compatible with the NDE / LE locks if needed.Here is the ...
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series
What is the minimum stile width for LE?
Mortise case is about 4 1/2" so we will have to suggest 5" minimum...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » LE Series
Cannot factory reset the LE lock.
The LE lock has a RX module that needs to be properly orientated to execute the FDR process.
The RX module and associated stop screw should be on the inside of the door on the mortise body...
Schlage Commercial » Electronic Locks | Schlage Commercial » Electronic Locks » LE Series
I created a Holiday schedule on the Engage portal but it didn't list any Assigned Devices.
After creating the holiday schedule on the web portal, you must assign the holiday to the devices and then go to each door and SYNC to update the device. Or wait overnight if you locks ar...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE
What tool is needed for the NDE security screw?
You will need the T-15 and the T-20 Secure torx tool.
You can order them from us.
Part #: L283-121
Contains:
(2) Armor screws, #8-32 x 1/4” (T-15)
(2) Strike...
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series
Will NDE80/NDEB80 locks read Indala cards?
No, none of our Engage series locks can read the the Indala cards.
Only Indala readers can read the Indala cards.
...
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE