Category: Pure Access Cloud

(Results from 51 to 60)
Does integrator level web access need to be disabled at each subtenant individually for Pure Access RMR users?
If you disable an integrator level web access, you will have to go into each and every one of your subtenants and disable that users web access....
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Cloud
How can I see events other than SysAdmin in Isonas widgets?
On the History Widget, there is a MORE FILTERS selection.  Click on MORE FILTERS and there will be a slider for Show System Administrator.  Turn that Off temporarily and it will not...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Cloud
How many entries are displayed on the Isonas Dashboard on the History widget?
A maximum of 50 events are displayed on the history widget. If you need to see more, you can run a Report to see entries prior to those 50. ...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Cloud
In Pure Access Cloud, is there a way to generate a notification when a device is offline?
You can create a customer rule to send notifications when a device is disconnected. You can go to the link below for instructions: https://manual.pureaccess.com/pure-access-manual/1/en/topic...
Schlage Commercial » Software » Isonas » Pure Access Cloud
Create holiday option not available on Pure Access Cloud.
If you Isonas Pure Access Cloud account is linked to Engage, you will not be able to create holidays. You will have to use Events to set a different unlock or lock time from Weekly Rule. ...
Schlage Commercial » Software » Isonas » Pure Access Cloud
How should Engage devices be added back to Pure Access if they need to be reset?
Delete Access Point from Pure Access first. This will also remove the device from Engage. Perform the factory reset process at the lock. You can then use the Engage mobile app to add dev...
Schlage Commercial » Electronic Locks » ENGAGE Application » Mobile App | Schlage Commercial » Software » Isonas » Pure Access Cloud
Does Isonas Pure Access Cloud work on all web browsers?
Supported web browsers: - Google Chrome - Mozilla Firefox   Does not support: - Internet Explorer - Edge - Netscape - Opera ...
Schlage Commercial » Software | Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Cloud
Isonas Pure Access Cloud - Support for NDE and LE (Non-"B" Versions)
Isonas Pure Access Cloud supports NDE and LE devices, as well as NDEB and LEB.With the non “B” versions, these do not support Schlage Mobile Credentials, but will support all of the same physical ...
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Electronic Locks » LE Series
Isonas - Devices and Important Network Ports
Network configuration needed for Isonas-brand devices to connect to Isonas Pure Access CloudPort 55533 open on firewall10 Mbps, Full Duplex.  Auto-negotiate disabled.Ports used for the Isonas Con...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » RC-03 | Schlage Commercial » Software » Isonas » IPBridge
Why is the Compile option grayed out in Pure Access Cloud?
Pure Access Cloud can get into a state where the Compile option is grayed-out and cannot be sent. Refreshing the browser page will allow you to send Compiles again....
Schlage Commercial » Software | Schlage Commercial » Software » Isonas » Pure Access Cloud