Category: ALX Series

(Results from 11 to 20)
What is included in the ALX Chassis kit?
ALX Chassis Kits include:  Chassis assembly and Outside Rose Strike Inside Rose (RHO) only Inside springcage ...
Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What is included in the ALX Function kits?
ALX Function Kits include a latch, plunger, & button, other parts as required : • 10 Function kit - latch only • 40 function kit - latch, inside push button and plunger, outside turn as...
Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What are the part numbers for the key-in-lever cylinders for the ALX series lockset?
The standard (non-Primus) cylinder for the ALX50, ALX53, and ALX80 is 21-020 The standard (non-Primus) cylinder for the ALX70 is 23-195 The Primus cylinder for the ALX50, ALX53, an...
Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
Does the ALX springlatch have a removable sleeve for 7/8" latch preps?
The ALX springlatch 47272024 does not come with a removable 1" sleeve....
Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
Why does my ALXV80 retract the latch when I pull up on the outside lever?
If the incorrect tailpiece is used on the ALXV80, this can also allow the outside lever to rotate enough to retract the latch. Check to be sure the correct tailpiece is being used....
Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
Are the ALX-series and AL-series latches interchangeable?
For example: The AL-series latch bolt bar only moves 3/8" which can cause problems if used with the ALX-series....
Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
Can the W-series latch be used with the ALX-series?
The Falcon W series latch was not design or tested for use with the Schlage ALX lock. The W-series latch may fit, but the ALX latch is specifically designed for functionality and performance in the AL...
Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What is the housing diameter for the ALX latches?
The housing diameter on the ALX latches is 7/8" for all latches except those noted below The following ALX latches have a 1" housing diameter:   47272024 14-010 13-2...
Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
Is the ALX series UL certified?
When specified with the 14-042 (3/4" throw) fire latch, the ALX is UL certified for use on 8' x 8' 3-hour pair doors....
Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What is the 47262735 kit?
Installation instructions for the ND170 and ALX170 can be found here. Installation of the optional 47262735 through-bolt and washer mounting kit are shown in steps 1 through 3....
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series

Support by product