Category: HL6/PL7/PL8 Series

(Results from 41 to 48)
Will the older HL6 spindle work in the newer latchbolt assembly?
You can replace an older HL6 latchbolt with the current HL6 latchbolt....
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
When did the spring for the HL6 change from 1 coil to 3 coils?
The spring changed in the late 1980's from the 1 coil spring to the 3 coil spring....
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Are security screws available for the HL6?
When ordering an HL6/PL7/PL8 product the suffix SOC can be used to specify security screws.  If security screws are needed separately the part number for the security screw pack is 840613-00....
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
How is the HL6, PL7 and PL8 lead lined?
Part numbers for the lead lining kits are: HLPART.10153 HL6/PL7/PL8 LEAD LINING PKG 2 HLPART.10154 HL6/PL7/PL8 LEAD LINING PKG 3 HLPART.10155 HL6/PL7/PL8 LEAD LINING PKG 5" B...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
What are the differences between the HL6, PL7, & PL8 tubular locks?
The HL6 tubular lock is a passage function.The PL7 tubular lock is a privacy function with push-side thumbturn.The PL8 tubular lock is a privacy function with pull-side thumbturn. ...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Can only push or pull handle assemblies be installed on both sides of the door on the Schlage HL6 tubular lock?
The push or pull paddle assemblies cannot be installed on both sides of the door....
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
On the HL6 mortise lock what cam is used?
Most of the L series functions will use the standard Clover cam for operation of the lockset. Except for the L9060, that will use the straight cam....
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Can the HL6-9000 be installed with paddle only on one side?
Engineering has confirmed that the mortise pocket lacks sufficient clearance for the lower mounting bracket of the push‑pull paddle assembly, so the HL6‑9000 cannot be mounted with a paddle on onl...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series

Support by product