Is there a 7/8" lip strike for the HL6?
As an optionYou can order separately the XQ02-309 (T strike) and specify 7/8" lip lengthYou can order separately the XQ07-351 (ANSI strike) and specify 7/8" lip length...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
What is the standard strike lip length for the HL6?
HL6/PL7/PL8 T strike part numbers:HL6PART.10040 (605)HL6PART.10041 (606)HL6PART.10042 (612)HL6PART.10043 (613)HL6PART.10044 (625/626/629/630)...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Can the HL6 tubular lock be ordered less outside trim?
The HL6 tubular lock can be ordered EO (Push die latch only) or EN (pull side latch only). The lock will provided with a blank plate for the opposite side of the lock. ...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
What is a bent tab strike?
The purpose of a bent tab is so that if you experience door rattle, the tabs can be bent back slightly (toward the open area) so that the tab holds the door tightly against the doorstop/mold...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » K Series (Falcon) - Discontinued | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
What grade is the HL6 and HL6 9000?
The HL6 & HL6 9000 locks are not graded....
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
Are Schlage HL6 products handed?
During the installation process the chassis and latch can be oriented in either direction to accommodate any hand or swing of door.
For HL6 L9000 functions handing for the lock case can b...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000