Can the HL6 paddles be mounted with one up and one down?
The HL6 paddles can be mounted in the following vertical configurationspush paddle up, pull paddle downpush paddle down, pull paddle uppush paddle up, pull paddle uppush paddle down, pull paddle downT...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Are the PL7 and PL8 BHMA graded?
The PL7 and PL8 are not certified for BHMA grading....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Will current HL6 latches work with older HL6 locks?
If your HL6 latch looks like the one pictured here, then a complete new lock and latch will have to be ordered. Latch shown is dated around 1975. ...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
What does Q mean in the part number for HL6?
The Q in the part number or order acknowledgment for HL6 references the quiet latch.
Features and Benefits
Quiet functionality
Dampened paddle action – depression and snapbac...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Is there an offset between the Center Line of the Strike and the Lock on an HL6-9000?
The Strike Center Line is located 3/8" or 10 mm above the Lock Center Line.
Please click here for a link to the Installation Instructions; reference step 2a.
...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series