Have the HL6/7/8 and HL6-9000 cover screws changed?
Cover screws for the HL6 are different depending on the date of manufacture.
Manufactured since June 18th, 2018
Finished cover screws K110-020 (pack of 2 each K510-210, #8-32 X...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Are the HL6-9000 paddles ligature resistant compliant?
However, Schlage makes ligature resistant lever (SL1) and knob (SK1) kits that can be used in place of the HL6 push/pulls on the HL6-9000 mortise locks.When converting an HL6-9000 to have ligature tri...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000
Is the HL6 trim certified to UL305?
The HL-6 single point cylindrical or mortise locks are not tested to the UL305 (Panic Hardware). The panic standard doesn’t apply to these locks or trims....
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Can the HL6 paddles be mounted with one up and one down?
The HL6 paddles can be mounted in the following vertical configurationspush paddle up, pull paddle downpush paddle down, pull paddle uppush paddle up, pull paddle uppush paddle down, pull paddle downT...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Are the PL7 and PL8 BHMA graded?
The PL7 and PL8 are not certified for BHMA grading....
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
Will current HL6 latches work with older HL6 locks?
If your HL6 latch looks like the one pictured here, then a complete new lock and latch will have to be ordered. Latch shown is dated around 1975. ...
Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series