LCN PA mount closer with Coordinator
ST reference document found here.Part number for the MS screws only is MS x ½” x Finish (individual screws) or MS/4 x ½” x Finish (pack of 4 screwsFor current ST pricing and templates please con...
Schlage Commercial » Door Controls » High Security » 4210 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4030 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4040 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series » LCN | Schlage Commercial » Mechanical Accessories » Latches, Catches & Bolts » Ives | Schlage Commercial » LCN | Schlage Commercial » Door Controls » Surface Mounted » 1250 Series | Schlage Commercial » Door Controls » Surface Mounted » 1450 Series | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series
Are the old style 4050 arms still available?
When LCN launched the 4050A closer, the old style 4050 arms where available for a period of time as an ST (ST-5220 XX), but as of April 17, 2023 a decision was made to obsolete them all. ...
Schlage Commercial | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series
Is the LCN spring cush block the same for all LCN series closers?
The 3080-spring block is the same for all LCN closers and interchangeable between the different series except the 1250 and 1450 series closers. The 1250 and 1450 use the same spring cush block.&...
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4030 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series | Schlage Commercial » Door Controls » Surface Mounted » 1250 Series | Schlage Commercial » Door Controls » Surface Mounted » 1450 Series | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series
Can you purchase just the hold open nut for the HEDA arm?
The hold open nut for the HEDA arms on some series can be replaced. The part number is the -41 and is found in the 4040XP, 4110, 1260 and 1460 series and the 4050A will use the 4040XP-41...
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series
When did the LCN 4050 closer change to the 4050A?
The 4050 changed to the 4050A on Jan. 1, 2020. The cylinders are exactly the same, but the 4050A arms are different (different templating)....
Schlage Commercial » Door Controls » Surface Mounted » 4050 Series
Can an LCN 4050A EDA mount with GJ90?
ST-5204 is used with a 4050A EDA closer and GJ901-904 overhead stop. This can only be used with GJ901-904. Use Rw62A arm if using GJ905 or GJ906 ST-5204 includes a ...
Schlage Commercial » Door Controls » Surface Mounted » 4050 Series
How do you change the handing of CUSH and SCUSH arms?
The handing of the CUSH, HCUSH, SCUSH, and SHCUSH arms can be changes by moving the stop/spring block form one side of the shoe to the other. The CUSH shoe stop requires a 5/16 hex wrench.The SCU...
Schlage Commercial » Door Controls » Surface Mounted » 1260 Series | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series