Category: Automatic Door Bottoms / Sill Protection

(Results from 1 to 10)
Do automatic door bottoms (ADB) require Z49 end caps in order to use the optional “Pull Out” feature?
Do auto door bottoms require Z49 end caps in order to use the optional “Pull Out” feature? No, the Z49 end caps don’t have anything to do with the “pull out” function.  They are a...
Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
Can an automatic door bottom (ADB) be cut down to size at the factory?
Yes.   LIst automatic door bottom size needed on PO.   Allegion will contact you if size not available. ...
Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
What dos a Zero Automatic Door Bottom (ADB) do?
What does an ADB do?  Doors typically have a gap between the door bottom and the floor or saddle (threshold). This gap can allow light, air, sound, smoke, and flames to penetrate....
Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
How Do I select an Automatic Door Bottom (ADB) ?
Considerations For Selecting An Automatic Door Bottom There are many factors that should be taken into consideration when choosing an Automatic Door Bottom. Below is a summary of questions to a...
Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
How Do I Clean or Maintain My Zero Automatic Door Bottom (ADB) ?
How do I clean my Automatic Door Bottom (ADB)? Zero Automatic Door Bottoms can be cleaned with mild soap and warm water and a non-abrasive sponge or cloth. Do not use any harsh solvents or cleaner...
Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
Can a Zero Automatic Door Bottom (ADB) be used on a sliding door?
Yes, Zero ADBs can be used on sliding doors. However, the operation may not be ideal and should be reviewed prior to confirming the solution. When an ADB is used on a sliding door,  th...
Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
How do I close gap between Automatic Door Bottom (ADB) and floor ?
There is a gap between my ADB and the floor or threshold. How do I adjust this? To adjust the drop of the ADB, the unit must be properly installed on the door. After installation, open the door,...
Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
What is the leading edge of a door with respect to door bottoms ?
With respect to mortised  automatic door bottoms (ADB) ,  door will sometimes be specified with a clean leading edge. This is specified for aesthetics. For mortised automatic door ...
Schlage Commercial » Zero | Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
Does the Auto door bottom model 360 have a set screw only if it has a pull out option?
The set screw secures the internal components within the track and is present whether the unit has a pull out option or not.   ...
Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
How do I re-hand an auto door bottom
Only the 321 & 323 Automatic Door Bottoms (ADB) need to be re-handed by rearranging internal parts.  For these ADB's, you can remove the set screw from the side of the unit, then from one end...
Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection

Support by product