Category: Zero

(Results from 51 to 60)
Zero Adjustable Thresholds: Tips For Selecting The Correct Pieces
The Zero catalog (click HERE)  shows a variety of options for adjustable thresholds. Selecting the proper size threshold  Choose the overall height of the threshold that is need...
Schlage Commercial » Zero
What door hardware is FEMA approved for Steelcraft Paladin Tornado doors and frames?
For a current list of approved door hardware, please refer to Tornado section of the Steelcraft Tech Data Manual, which can be found here.  Within this section you will find the following:...
Schlage Commercial » Door Controls » Accessories | Schlage Commercial » Door Controls » Surface Mounted » SC80 Series » Falcon | Schlage Commercial » Falcon | Schlage Commercial » Ives | Schlage Commercial » LCN | Schlage Commercial » Von Duprin | Schlage Commercial | Schlage Commercial » Zero
What Zero products to I use to improve acoustic (STC) ratings?
In many homes and buildings, there is a need for sound control solutions. Examples are hospital rooms, therapy offices and sound studios to name just a few. There are numerous variables to c...
Schlage Commercial » Zero
What is the leading edge of a door with respect to door bottoms ?
With respect to mortised  automatic door bottoms (ADB) ,  door will sometimes be specified with a clean leading edge. This is specified for aesthetics. For mortised automatic door ...
Schlage Commercial » Zero | Schlage Commercial » Sealing Systems » Automatic Door Bottoms / Sill Protection
Can I replace the brass nut for Zero automatic door bottoms?
If a Zero automatic door bottom is installed as directed per intallation instructions and still needs a small amount of additional actuation,  a longer brass nut can be installed onto the door ...
Schlage Commercial » Zero
Does the Zero automatic door botton with pull out option use the set screw?
Yes. Zero automatic door bottoms with pull out option should have the set screw. The set screw has nothing to do with the pull out option. If the set screw is missing or has been removed, th...
Schlage Commercial » Zero
Do automatic door bottoms drop evenly or from the hinge side first?
With the exception of the 7350, the Zero automatic door bottoms do drop from the hinge side first. ...
Schlage Commercial » Zero
How do I increase tension on an automatic door bottom?
Rotate the tension adjusting screw counterclockwise. The screw (brass nut) is located on the hinge side of the door.  Instruction sheets for Zero automatic door bottoms can be found at ...
Schlage Commercial » Zero
Does increasing tension on an automatic door bottom (ADB) increase door closing force?
Yes. Increasing tension on an automatic door bottom will increase pressure on the door closer. The door closer may have to be adjusted to compensate. ...
Schlage Commercial » Zero
Will a Zero automatic door bottom (ADB) work on an uneven floor?
The automatic door bottom may work on an uneven floor by adjusting the tension as long as the slope difference on the floor from hinge edge to the active edge does not exceed 3/8". If using a surface ...
Schlage Commercial » Zero

Support by product