Category: Zero

(Results from 11 to 20)
Can I add a an automatic door bottom (ADB) if the door is mortised and the door edges are fully intact?
Yes.   If the door is fully mortised,  then a hole can be drilled in the edge of the door for the plunger and nut to be exposed.The brass plunger nut can be threaded out by hand for eno...
Schlage Commercial » Zero
How long is the fire rating for Zero 188S?
3 Hrs for hollow metal rated doors & frames.1 ½ hrs for wood & plastic covered composite doors20 minutes for wood core doorsPlease consult the UL online directory,  or contact All...
Schlage Commercial » Zero
For Zero 188S , what does G and H mean?
The G and H designations refer to Categories of positive pressure listing.G is edge sealing.H is Smoke and draft control gasketing.https://www.dhi.org/shared/forms/PDFforms/Publications/TechTipJan09.p...
Schlage Commercial » Zero
Are Zero threshold optional anchor fasteners grouted into the floor?
The anchors are not grouted, they are expanding-type  anchors....
Schlage Commercial » Zero
What Allegion components are ITS/WHI Intertek approved for Windstorm/Tornado Resistant openings?
The Steelcraft Paladin Series doors and frames are available in compliance with FEMA 361 and ANSI ICC500-2014.  The door system may include other approved Allegion hardware and components that ar...
Schlage Commercial » Automatic Operators | Schlage Commercial » Doors and Frames | Schlage Commercial » Exit Devices | Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Locks | Schlage Commercial » Falcon | Schlage Commercial » Glynn-Johnson | Schlage Commercial » Ives | Schlage Commercial » LCN | Schlage Commercial » Schlage | Schlage Commercial » Steelcraft | Schlage Commercial » Von Duprin | Schlage Commercial » Zero | Schlage Commercial » Sealing Systems
Do we have security screws available for Zero International thresholds?
Yes, as engineering special....
Schlage Commercial » Zero
Where is the template for the Z953 Cam Lift Hinge?
Dimension for the Z953 cam lift hinge can be found by clicking HERE....
Schlage Commercial | Schlage Commercial » Zero
Where are instructions for Zero 56, 557 adjustable mortised astragal
Please click HERE for 56, 557  instructions....
Schlage Commercial » Zero
Trimming Rabbeted Thresholds / Rubber / Neoprene / Gasketing
Rabbeted thresholds like the 65 with the rubber seal may need to be cut and trimmed to size in the field.• Please remove the rubber before cutting• The rubber may have dabs of glue on it placed by...
Schlage Commercial | Schlage Commercial » Zero | Schlage Commercial » Sealing Systems | Schlage Commercial » Sealing Systems » Thresholds | Schlage Commercial » Sealing Systems » Multiple | Schlage Commercial » Glossary
Mounting hardware for mortised meeting stile?
The mounting screws for mortised meeting stiles projects into the door 5/8" past the cutout. If the cutout is .790" deep, the screw will bottom out, or snug-up, at an overall depth of 1.415". The...
Schlage Commercial | Schlage Commercial » Zero | Schlage Commercial » Sealing Systems

Support by product