Does the 1450T closer ship standard with a Hold Open roller?
Yes. The hold open roller ships standard with a 1450T closer....
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » LCN | Schlage Commercial | Schlage Commercial » Door Controls » Surface Mounted » 1450T Series
Is the LM9200 series multipoint lock available with an indicator?
Mechanical LM9200 (LM9210, LM9225, LM9280) and electrified LM9200 series (LM9290, LM9291, LM9292. LM9293, LM9294 and LM9295) are not available with an indicator and a indicator cannot be used with the...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial
What is QM for Von Duprin?
Accepting orders for the QM option on 98/99 Rim Exit Devices, 33A/35A Rim Exit Devices, and 996L/L-BE-R/V Trims starting 4/23/2018.
Accepting orders for the QM option on the 98/9927 Surface Vert...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin | Schlage Commercial
Are the cylinder standoffs on the LCN 4800 and 4600 units the same?
The cylinder standoffs are different between the LCN 4800 series and the 4600 series units shipped prior to 3/19/19.
Both standoff's are 1 5/8" long and 1/2" wide BUT:
Th...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series | Schlage Commercial » Automatic Operators » Pneumatics | Schlage Commercial » Automatic Operators » Pneumatics » 4810 Series | Schlage Commercial » Automatic Operators » Pneumatics » 4820 Series | Schlage Commercial » Automatic Operators » Pneumatics » 4840 Series | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » LCN | Schlage Commercial
What did the K suffix for the old D800 and D400 represent?
This was not the standard thumb-turn. This thumb-was longer and was a black powder coat (622) finish. Also, the shape was not the same as the standard thumb-turn....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Deadbolts » D Series » Falcon | Schlage Commercial
What replaced the D891BK deadbolt from Falcon?
There is no current option to replace the D89BK. This was a deadbolt with a 2" handicap thumb-turn inside and a blank occupancy indicator on the outside....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Deadbolts » D Series | Schlage Commercial » Falcon | Schlage Commercial
What is the latch throw for the HL6?
The throw or project of the HL6 tubular latch is 1/2". ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Push/Pull Latches | Schlage Commercial | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series