AD lock with 25M
No. The AD and CO 993 trims will only work with a 25M in the Falcon line...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Mechanical Accessories | Schlage Commercial
What is the minimal wiring to bench test a Chexit device?
FOR TESTING PURPOSES ONLYThe following wiring can be used to verify that the device will arm and alarm.The FA Connection (a Normally Closed Fire Alarm Dry Contact between the Yellow and Red wires of t...
Schlage Commercial » Exit Devices | Schlage Commercial
Is it possible to cut a Zero automatic door bottom (ADB) ?
Following are considerations for cutting an Automatic Door Bottom (ADB):
Zero ADBs can be trimmed down in the field to better fit the opening.
Trimming must be done on the lock si...
Schlage Commercial » Mechanical Accessories | Schlage Commercial | Schlage Commercial » Zero
Will an HL6 work with an 88 series rim device?
No. The HL6 square spindle/hub does not orient with the receiver of the 88 series....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Cross Bar | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial
Does the 1450T closer ship standard with a Hold Open roller?
Yes. The hold open roller ships standard with a 1450T closer....
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » LCN | Schlage Commercial | Schlage Commercial » Door Controls » Surface Mounted » 1450T Series