Can I buy a replacement solenoid-driven Chexit module with 0 or 30 second time delay?
Von Duprin launched the present motor driven Chexit device on 8/24/2015 and discontinued manufacturing the solenoid driven Chexit devices at that time..The current Chexit Circuit Boards/Modules are no...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin | Schlage Commercial
Is the LCN 4050A and 4050AT metal covers handed?
Both the 4050A and 4050AT metal covers are Non-handed. Each metal cover have two cutouts for the spindle and there is an insert used to cover the unused hole.
...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial
Can the handing be changed on the LM9200?
The handing on the LM9200 can be changed in the field. Please follow the handing instructions as found in steps 2 and 3 of the LM9200 instruction sheet. Information on the LM9200 lever desig...
Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial
Is LM9200 available less top latch?
The LM9200 is not available to be ordered less top latch, nor can the LM9200 series be used less top latch.
...
Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial
Is the LCN Alum Series closers available in a plated finish?
No. The Alum LCN series of closers, which include the following; 1250, 1450, 1450T, 4050(A), or 4050(A)T are not available in a Plated Finish....
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial
What can clean oil off a door that had a closer leak fluid?
To break down the oil molecules use an acidic cleaner or even use vinegar to wipe down the door.
May also try using Simple Green to remove oil if hasn't stained
...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Overhead Concealed | Schlage Commercial » Door Controls » Automatic Operator | Schlage Commercial » Door Controls » Concealed | Schlage Commercial » Door Controls » Fire Life Safety | Schlage Commercial » Door Controls » High Security | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial
What type of finish is on the LCN SEM 7800 magnets?
They are supplied in a Powder Coat finish. Standard finishes are Alum and Dark Bronze.
...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Fire Life Safety | Schlage Commercial » Door Controls » Fire Life Safety » SEM 7800 Series Magnets | Schlage Commercial