What is the recommended wiring for a Gateway?
Wiring for the Gateway:DC terminal input: 18AWG, 2 conductor (Belden 8760 or equivalent) up to 1000 ft (305 m)Gateway to ACP: 24AWG, 2 or 4 conductor shielded (Belden 9842,9841 or equivalent) up to 40...
Schlage Commercial » Electronic Locks » Gateway
How can I downgrade firmware on an Engage device?
Only one Control version lock can be downgraded.Control devices that are programmed with Firmware 03.15.01 can be downgraded to any version.Here are the versions that you CANNOT downgrade from as of 0...
Schlage Commercial » Electronic Locks | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE
Why would you use a gateway with PIM 400 485 and AD 400 Locksets?
As long as they are using RSI mode, (using either 2- or 4-wire RS-485 connections) then yes, they can daisy chain PIM400-485 and gateways in the same chain. Just make sure the PIMs and gateway's addre...
Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » Gateway
Where can I find the release notes for Engage products?
All of the release notes for the Engage products can be found here:https://commercial.schlage.com/en/resources/troubleshooting-maintenance/engage-family-resources.html...
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Readers » Enrollment » MT20W | Schlage Commercial » Software » Isonas » RC Reader Controller