Can Engage GWE Gateways and AD400 / PIM 400's work together on same Access System?
Using RS485 communications, they can but it is dependent on Access Control Systems accepting both lock types.
Contact your preferred Access Control provider to confirm.
...
Schlage Commercial » Electronic Locks » Networked » AD 400 Series | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Gateway
How to change a GWE from RSI mode to IP mode?
Once a Gateway has been commissioned, you cannot change the mode.
You will have to delete the Gateway from the Engage App, factory reset it, and commission it back to the Engage. During th...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » Gateway
Why is my engage lock not linking to the Gateway?
Please make sure the Engage lock you are trying to link is commissioned to the same site as the Gateway.
Once commissioned then follow the steps to link the lock to the Gateway.
...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE
Is Cache mode available for IP GWE devices?
Cache mode is NOT available for the IP Gateways.The IP Gateway pushes door files to the lock, so if it goes offline, all the data is still in the lock....
Schlage Commercial » Electronic Locks » Gateway
What is RSI Mode on the Gateway?
Connect ACP to the Gateway using either 2- or 4-wire RS-485 connections. Consult the software alliance provider on Gateway configurations.
The Gateway has RS-485 communication status:&nbs...
Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Glossary » Electronic Locks