BE467 delinking
To temporarily DE-LINK the BE467 & FE410 (break the persistent BLE LINK) from the Gateway, present a smart card to the reader, and and the reader will beep, quickly cycle the Deadbolt switc...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
CTE cache mode UI
There is no Cache mode on CTE when using the Engage platform.When using Engage Managed account, CTE LINKS with IP Gateway only, and IP mode makes the decision at the door. IP mode has no cache mode or...
Schlage Commercial » Electronic Locks » Networked | Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » Gateway
Schlage Engage Gateway - Output Modes
The ENGAGE Gateway can work in two modes.
RSI Mode: In this mode, the Gateway communicates with an access control panel (ACP) and alliance partner access control software to contro...
Schlage Commercial » Electronic Locks » Gateway
Why am I getting a DUID error when commissioning my Engage device?
When commissioning your device using the Engage mobile app, try the following order of steps:
Ensure no other bluetooth devices are active on the mobile device when using the Engag...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » Gateway
Can you daisy chain power to the Gateway?
Yes, you can daisy chain the Gateways.
You have to make sure there is enough amperage if using a power supply. You&n...
Schlage Commercial » Electronic Locks » Gateway
How does the RU/RM check and update its internal time?
It should get a command from ACP and GWE will push the update to the device....
Schlage Commercial » Mechanical Locks » Cylindrical » RU Series | Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » Gateway