Category: LM9200

(Results from 51 to 59)
What size are the Molex connectors on the Allegion Connect Harness?
Allegion utilizes the Micro-Fit Connectors products on the Allegion Connect Harness.  The Allegion Connect Harness is made up of twelve wires inside the cable.  At both ends of the harness t...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Is a bottom latch required on a LM9200 for a 45 minute fire rated wood door application?
The LM9200 series must have both the top and bottom latch when installed on a 45 minute fire rated wood door application....
Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can the LM9200 be installed into an aluminum door?
Not a recommended application due to the amount of material removed from the door as well as the special support brackets needed for the top and bottom latches....
Schlage Commercial » Mechanical Locks » Mortised » LM9200
What is the Schlage LM9200?
The Schlage LM9200 Series is an innovative one or two point latch solution for pairs of wood doors where both leaves need to be active. Instead of traditional concealed rods, the LM9200 utilizes conce...
Schlage Commercial » Mechanical Locks » Mortised » LM9200
What is the part number for the LM9210 or LM9225 lock body only?
The LM9210 and LM9225 functions use the same lock body part number. The part number is: 24759599 for the lock body only....
Schlage Commercial » Mechanical Locks » Mortised » LM9200
Are the Schlage LM9200 cables the same as the Von Duprin 49 cables?
The cables in the Schlage LM9200 series multipoint lock are not the same as the Von Duprin 49 cables.Drawing of the Von Duprin 49 cables: Drawing of the LM9200 cables:...
Schlage Commercial » Mechanical Locks » Mortised » LM9200
Do Schlage commercial mechanical or electrified mortise locks meet NFPA 70 Hazard Classification?
Schlage mortise locks are not listed to UL 1203 for use in hazardous locations....
Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000 | Schlage Commercial » Mechanical Locks » Mortised » PM Performance Series
Is the Schlage LM9200 series Multi Point lock available with Vandlgard?
The Schlage LM9200 Series Multi Point lock is not available with Vandlgard....
Schlage Commercial » Mechanical Locks » Mortised » LM9200
How to remove terminal pins from the Molex connector?
Please click here for the Allegion Connect Service Manual, see page 26 for instructions on how to remove the terminal pins...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial » Mechanical Locks » Mortised » PM Performance Series

Support by product