Category: LM9200

(Results from 41 to 50)
Which Thumbturn is used with the Schlage L9000/LM9200 Escutcheon Inside Occupancy Indicator?
The Escutcheon Trim Inside Occupancy Indicator uses the Standard ADA Thumbturn shown below with the 09-544 ADA Thumbturn for Sectional Trim.  This applies to Occupancy Indicator Option...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
What are the dimensions of the Gen1 L9000 indicators?
The 09-611 indicator: Now called ChevronWhich is sometimes referred to as the birdhouse or birdcage indicator dimension is approximately 1-3/4" wide by 3-5/16" long.The 09-611 is supplied standard wit...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Is there a Tactile lever option for the Schlage L9000 series?
There is a Tactile warning option for the L9000 series Mortise locks.  The following levers are available with the Tactile warning: Tactile warning applied to outside lever; available o...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can the LM9200 be used with an electric strike?
Schlage's LM9200 series was not designed for or tested with an electric strike....
Schlage Commercial » Mechanical Locks » Mortised » LM9200
Will the Schlage LM9200 series operate without the outside lever trim?
Based on the operation of the LM9200, the outside lever is required to retract the latches....
Schlage Commercial » Mechanical Locks » Mortised » LM9200
What is the part number for the Armor Front for the LM9200 series?
The part number for the Armor Front is 24594970, and specify finish when ordering. ...
Schlage Commercial » Mechanical Locks » Mortised » LM9200
What is an armor front?
The Armor Front for the Schlage L9000, LM9200, and LM9300 series has been referred as: Scalp, Face Plate...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial » Glossary » Locks
Where can I find Interactive installation instructions for the Schlage LM9200?
Click here to launch the LM9200 Interactive Installation Instructions. ...
Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can I order the L Electrified Motor assembly, part number L283-680?
The L9000 Electrified Motor assembly part number L283-680, is listed in the L Series Service Manual but is not available as a part.  The complete lockcase must be purchased....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
What is the part number for the latch cover for the Schlage LM9200 series mulitpoint lock?
The part number for the latch cover is 24871584.  A quantity of two per lock are needed. ...
Schlage Commercial » Mechanical Locks » Mortised » LM9200

Support by product