Category: Von Duprin

(Results from 81 to 90)
How do I find the strike location on the frame for the 338 strike?
To find 338 strike location in frame you must follow the backset information on device template. This strike is used with multiple devices and has many dfferent backsets, depending on device....
Schlage Commercial » Von Duprin
Can a 237L LBR be used on a non fire rated opening?
The 237L can't be used as a LBR on fire or non fire rated openings...
Schlage Commercial » Von Duprin
Can I add 996LNL to my 99EO?
The Von Duprin 98/99EO exit devices will accept any of the exterior trims that we offer for 98/99 exit devices without any extra parts. 996L, 996L-NL, 996L-DT, 996L-BE, 990NL, 990DT, and 110NL ar...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Does EL or QEL conversion kit for Von Duprin exit devices contain mechanism cover plate?
The conversion kit does not contain a new mechanism case cover plate.  If a cover plate is desired, you would need the Fire or Less Dogging Cover Plate for EL/QEL conversion kit and Panic cover p...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Is the electric locking available on 98/99 rims?
Electric locking is not available on 98/99 rim device.  This option is available on the E996L trim with all 98/99 rim, mortise, surface and concealed vertical rod devices....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Can the Von Duprin 996L lever handle be replaced with a new one?
Yes, Von Duprin 996L lever handle can be replaced with a new one . Attached installation instructions shown how to replace the existing lever handle on 994/996L trim for rim and vertical rod device�...
Schlage Commercial » Von Duprin
Can I use 350 dummy pushbar with 996LDT?
To use 350 dummy push bar with 996L-DT you will need the 050140 mounting hardware for standard 1 3/4" door, or 050141 for 2 1/4" door....
Schlage Commercial » Von Duprin
Can the CD cylinder dogging and RX switch be ordered with 33/35 or 98/99 exit device?
This can be done ONLY with non fire rated exit devices....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Why would a 3021-FS electric strike not relock?
Check the voltage at the strike and make sure you have proper voltage at the strike. ...
Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin | Schlage Commercial » Von Duprin
Are there autoCAD drawings available for Allegion products?
AutoCAD drawings are proprietary and are not available for distribution.     ...
Schlage Commercial » LCN | Schlage Commercial » Schlage | Schlage Commercial » Von Duprin

Support by product