Category: Von Duprin

(Results from 81 to 90)
Does EL or QEL conversion kit for Von Duprin exit devices contain mechanism cover plate?
The conversion kit does not contain a new mechanism case cover plate.  If a cover plate is desired, you would need the Fire or Less Dogging Cover Plate for EL/QEL conversion kit and Panic cover p...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Is the electric locking available on 98/99 rims?
Electric locking is not available on 98/99 rim device.  This option is available on the E996L trim with all 98/99 rim, mortise, surface and concealed vertical rod devices....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Can the Von Duprin 996L lever handle be replaced with a new one?
Yes, Von Duprin 996L lever handle can be replaced with a new one . Attached installation instructions shown how to replace the existing lever handle on 994/996L trim for rim and vertical rod device�...
Schlage Commercial » Von Duprin
Can I use 350 dummy pushbar with 996LDT?
To use 350 dummy push bar with 996L-DT you will need the 050140 mounting hardware for standard 1 3/4" door, or 050141 for 2 1/4" door....
Schlage Commercial » Von Duprin
Can the CD cylinder dogging and RX switch be ordered with 33/35 or 98/99 exit device?
This can be done ONLY with non fire rated exit devices....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Why would a 3021-FS electric strike not relock?
Check the voltage at the strike and make sure you have proper voltage at the strike. ...
Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin | Schlage Commercial » Von Duprin
Are there autoCAD drawings available for Allegion products?
AutoCAD drawings are proprietary and are not available for distribution.     ...
Schlage Commercial » LCN | Schlage Commercial » Schlage | Schlage Commercial » Von Duprin
Can the fire label be replaced on a Von Duprin device?
The UL fire label is only applied to the device center case cover at the factory when the device is built.  This label can not be sold or replaced with a new one. A new d...
Schlage Commercial » Von Duprin
What does BOCA mean for the Von Duprin Chexit device?
The Von Duprin Chexit-BOCA has special software. Following is the function of this software: When Chexit device push bar is pushed and goes into alarm it will release in 15/30 second...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Will the Von Duprin 7500 mortise lock replace an old 34 or 58 lock body?
The Von Duprin 7500 mortise lock body will replace the old style 34 and 58 lock bodies. Order a 7500 mortise lock in the proper finish. The old style strike must be replaced with 575 strike because...
Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Von Duprin

Support by product