Category: Von Duprin

(Results from 71 to 80)
Do we have trims for old style 33/35 series of devices?
We no longer carry trims for the old style 33/35 exit devices.  New trims for 33A/35A series exit devices will not work with the old 33/35 series exit devices....
Schlage Commercial » Von Duprin
What is the difference between the E option and the E996L option for 98/9975 series devices?
E option for 98/9975 is an electric mortise lock.E7500 and E996L is an electric trim....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Do we offer a lever trim with squared top and bottom for the 98/99 series exit devices?
The Von Duprin 994L series trims were square on top and bottom.  They were discontinued in July 2010....
Schlage Commercial » Von Duprin
Can a panic device be converted to a fire-rated device in the field?
A standard exit device can't be modified to a fire rated exit device.  In order to get a product with the UL fire label, a new device must be purchased. This is a UL requirement....
Schlage Commercial » Von Duprin
What functions are available for the E996 trim?
E996 trim can be ordered FS or FSE, lever trim must be either L or L-BE. In both situation (E996L or E996L-BE), the electronics lock/unlock the lever. The E996L trim allows for the install...
Schlage Commercial » Von Duprin
Why is my E996L solenoid getting hot?
This is usually an indicator of applying excessive voltage.  Measure the voltage going into the solenoid and make sure you have 24-26.4VDC cross the two wires going into the solenoid. Also measure th...
Schlage Commercial » Von Duprin
What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?
The attached table shows the part numbers for LX-RX and LX-RX-LC switches field installed....
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Is there a conversion kit to electrify the LP373L lever control?
There is not a conversion kit to electrify the LP373L lever control.  You need to order a complete E-LP373L-BE control through Engineering Specials....
Schlage Commercial » Von Duprin
What is the part number for 98/99 series tailpiece guides?
The 98/99 series tailpiece guides part number is 050156-00, package of 10....
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
What is the draw amperage for the E996L?
PS902 is a 2 amp power supply and each E996L electric trim draws 0.25 amps at 24VDC. You can have up to eight E996L electric trim per PS902 power supply....
Schlage Commercial » Von Duprin