Category: Von Duprin

(Results from 51 to 60)
Where is the template for the E996L on a wood door?
The template for E996L wood template is the same as 996L wood template. W20003 for rim or vertical rod and W20006 for mortise....
Schlage Commercial » Von Duprin
What thumbturn control is correct for the 33A/35A/98/9947/48?
The 376T is the correct thumbturn control for 33A/35A/98/9947/48 exit devices for metal door and 376T-WDC for wood door. ...
Schlage Commercial » Von Duprin
Will the top latch on a 33/3547A work on a older 33/3547?
The current 33/3547/47-F latches are the same as the latches used with the old style Von Duprin 33/3547/47-F devices. ...
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Von Duprin
Do we have a finished screw package to mount the 990 or 230 DT trim on a door independent of an exit device?
You will need the 050140-xx finished screw package to mount the trim to a wood door....
Schlage Commercial » Von Duprin
What templates do I use for the RX98L x E996L?
 Click Here to view the Hollow Metal or Wood Door Templates for Von Duprin devices  The E996L trim and RX98/99 devices  use the standard 996L and 98/99 templates.&nb...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Does the Von Duprin E996L trim require the NL drive screw be installed into the device to function properly?
Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E996...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
Why does my Trilogy Lock not retract the latch when I replace a lever trim on a 98/99 series device?
If the NL screw on the 99 device has been removed the Trilogy lock will not retract the latch. ...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
What would keep the vertical rod exit devices top latch from being held retracted in the open position?
Following exit devices 2227/F, 33/3527A/F, 33/3547A/48A/F, 98/9927/F and 98/9947/48/F have similar rod adjustment procedures. All top latches control the bottom latch assemblies. When door ...
Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin
What is the part number for the spindle for a 373L control?
Part number for the 373L spindle is #967480-89...
Schlage Commercial » Von Duprin
What is the difference between the E option and the E996 option for 98/99 series rim devices?
We used to offer a E99 rim device where there was a solenoid to lock or unlock the lever or thumbpiece trim on the back side of the center case of the 98/99 device.  When we created the E996L trim th...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Von Duprin

Support by product