Category: Schlage

(Results from 71 to 80)
How do I change the function on an ND53 to an ND50?
For locks manufactured after 2017.Swapping out the following parts of an ND50 will convert it to an ND53:Swap N123-086 Push button plunger for N123-085, Push and Turn button plunger.Swap N52...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Schlage
When was e.Primus discontinued?
e.Primus was an electronic lock system that used iButton credentials to unlock a door.  Product was discontinued in July of 2002 with parts were available only for a short time.  Product support for...
Schlage Commercial » Schlage
What is the part number for the ND Series rose?
03-042 is the part number for the inside or outside rose....
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Schlage
What are the part numbers for the ND lock spring cages?
ND-series locks manufactured before January 30, 2017 used the following spring cages:...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Schlage
What Schlage cam will operate Sargent locks?
Click here for a list of available Schlage cams comparable to the Sargent 13-0660. ...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Schlage
How do you convert a L9080 to a L9070?
If swapping out complete lock case is not an option and you would like to convert components in the lock case this would void the warranty. See here for required parts....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Schlage
What is the standard FSIC mortise housing with a straight cam?
20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Schlage
Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?
The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Schlage
How to connect BE 367 into HHD?
HD /SUS  must be in serial communication mode. Tap icon at right of the  banner " no device connected". It should show the image of a 9 pin D connector for serial communication.once this has...
Schlage Commercial » Electronic Locks » Offline » CM Series » Schlage Electronics | Schlage Commercial » Mechanical Locks » Portable » CL Series » Schlage | Schlage Commercial » Schlage
How is the ND170 installed?
To install a Schlage ND170 click here for the installation instructions....
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Schlage