Category: Schlage

(Results from 61 to 70)
What is the part number for a L mortise lock spindle?
The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1.     Spindles and Springs   Part Number  Description  L283-060 Spindle and spr...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage
Schlage Utility Software (SUS) is not synchronizing door file information when connected to the lock
When synchronizing door files to the HHD  ensure that the SUS is not running.Make certain the proper sync folder location is properly configured in the Schlage express softwareVerify cable proper...
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CM Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Schlage
What is the part number for the L9000 lock solenoid?
The replacement solenoid for the Schlage L-Series mortise lock, part number L283-053, is obsolete and is no longer available. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Schlage
Can I use the 10-072 strike with a L400 Series lock?
Only the 10-079 or 10-078 strike should be used with the L400-Series.  ...
Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Schlage
What locks are always locked on the outside?
The storeroom lock function is described as follows: Latch bolt operated by key from outside or by operating inside lever. Outside lever is always inoperative. The following are storeroom functions...
Schlage Commercial » Falcon | Schlage Commercial » Schlage
What is the minimum stile for Schlage locks?
The minimum stile for each lock will depend on the backset and the rose diameter/escutcheon width.  See the Schlage Minimum Stile Requirements for the minimum stile for each l...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage | Schlage Commercial » Schlage
What is the part number for the Primus pinning kit?
40-070 is the part number for the Primus pinning kit. ...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Schlage
Are there autoCAD drawings available for Allegion products?
AutoCAD drawings are proprietary and are not available for distribution.     ...
Schlage Commercial » LCN | Schlage Commercial » Schlage | Schlage Commercial » Von Duprin
What is the part number for the double cylinder non-IC snap-on faceplate?
B600-092 is the inside snap-on faceplate for all non-IC double cylinder B562 and B662/762/862 deadbolts....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Schlage
What is the 23-065?
The 23-065 is the conventional cylinder for the ND-Series lever....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Schlage