How do you remove an AL lock from a door?
AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock is ...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series » Schlage | Schlage Commercial » Schlage
How does the AL170 get installed to make a double dummy?
Schlage offered the AL170 single dummy trim, but for applications where a double dummy was needed you can install two AL170 dummy trims back-to-back. Each AL170 was shipped with a threaded ...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series » Schlage | Schlage Commercial » Schlage
Does Schlage offer a cam that will work with a Yale mortise lock?
Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam.
Schlage Cams for Yale 2160
Part Number
Description
...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Schlage
Why is the L0170 not available in the L escutcheon design?
The Schlage L0170 is not available with the L escutcheon design because due to the narrow size you cannot fit the mounting plate underneath. The mounting plate must sit on a "diamond" ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Schlage
Does Schlage offer a rabbetted latch and strike kit?
Schlage does offer rabbetted latch and strike kit:
Part number, 39-030, for cylindrical locks and deadbolts.
Part number, 10-075, for the L9000 mortise locks.
Monarch does not offer rabbette...
Schlage Commercial » Schlage
What is the difference between the ND50 and ND53?
ND50PD (ANSI F82) Entrance/Office Lock
Push-button locking. Push-button locks outside lever until unlocked with key or by turning inside lever. Inside lever is always free for immediate egress. �...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Schlage
What is the 689 finish?
The BHMA standard 689 is an Aluminum finish, and is silver/gray in color....
Schlage Commercial » LCN | Schlage Commercial » Schlage | Schlage Commercial » Von Duprin
How do you order an L9482 lock body?
Order the L283-146 XL11-543 for each L9482 lock body needed. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Schlage