Category: Ives

(Results from 61 to 70)
What is the part number of the replacement rubber stop for IVES FS 153?
FSPART.1060  ...
Schlage Commercial » Ives
Can continuous hinges be cut to custom length at the factory?
Continuous hinges can be cut to custom length at the factory.  Additional charges for this are shown in the price book.  Specify door handing when requesting custom cuts, as cutting some mod...
Schlage Commercial » Ives
What is the diameter of the hole needed to mount a FS444 into concrete?
1/2" diameterhttps://us.allegion.com/content/dam/allegion-us-2/web-documents-2/InstallInstructions/Ives_FS444_and_FS448_Floor_Stop_Installation_Instructions_108161.pdf...
Schlage Commercial » Ives
Can I order a FS410 floor stop with a grey or tan rubber bumper?
No, they only come in black.  The rubber bumper for the FS410 decorative floor stop is replaceable though engineering specials, but Allegion offers them only in black.  ...
Schlage Commercial » Ives
Can the Ives Viewer Extensions be used on Fire Rated viewers?
Yes, the Viewer Extensions (840313 for 698 viewer and 840314 for 696, 700, and 701 viewers) can be used on the Fire Rated versions of these viewers (U698, U696, U700, U701)....
Schlage Commercial » Ives
Hinge Pin Stop #70 , Diameter of Hinge Pin
Note:  All the hinge pin stops were meant to work with either ¼” or 5/16” diameter hinge pins.However,  the  #70 hinge pin stop was slightly changed (as of 2015 approximately)&nb...
Schlage Commercial » Ives
Can the electrified XY hinge replace the electrified HD hinge?
The following details need to be taken into account if replacing the obsolete HD continuous hinge with the TWP or TW8 option with the new XY hinge with the TWP-CON option.      ...
Schlage Commercial » Ives
What is holding force for CL11 or CL 12 ?
There is no tested holding force available for the CL11 or CL12 cabinet latch. These devices are designed to latch a regular cabinet or light weight door ( such as closet or pantry).   ...
Schlage Commercial » Ives
Do we offer a longer spring for the 410S?
No, but a piece of aluminum bar stock in the track in front of the spring is  ok.Installer will need to position door where they want it , and then measure the length of block they will need...
Schlage Commercial » Glynn-Johnson | Schlage Commercial » Ives
What grade of stainless steel are the 7100/7200 pivots?
304 grade...
Schlage Commercial » Ives

Support by product