Category: Ives

(Results from 51 to 60)
Can the 224HD be used with Paladin doors.
Yes, the 224HD hinge can be used with Paladin doors.Please contact Allegion product support to discuss the details of your application....
Schlage Commercial » Ives
The holes in the MB1, MB2, MB1F, MB2F, MB3F, MB1V, MB2V, MB3V are for mounting the bracket, not any additional hardware.
·         The Ives coordinator mounting brackets have holes in them.  These holes are only used for mounting the bracket to the frame.  · &...
Schlage Commercial » Ives
Can a 112 HD or 112XY continuous hinge be used on a 2 & 1/4" door?
The 112HD/112XY hinges are made for and tested on 1-3/4" thick doors only.  For 2" - 2 & 1/4" thick doors we recommend using the 026XY or the 027XY....
Schlage Commercial » Ives
What is the part number for a 12" rod for an Ives FB458?
The FB458 with a 12" rod is a packaged/purchased item, so a 12" rod is not available as a sold separate item.  Ives does offer a sold separate rod package for the FB458 in sizes 18", 24", 36" and...
Schlage Commercial » Ives
What is the part number for the decorative cap for an Ives 9100 series with the "O" mount?
Individual parts from the "O" mount screw package are not sold separately.  ...
Schlage Commercial » Ives
Are the 3CB1 hinges fire rated?
Per the 2016 edition of NFPA 80, the only restrictions for using spring hinges in a UL Listed fire door application are “at least two shall be provided” per 6.4.3.1.1.2, must be “Grade 1” pe...
Schlage Commercial » Ives | Schlage Commercial » Building Code
How deep is the wire access hole for the XY TWP hinges?
For wood doors, wood frames, or composite filled frames the wire access holes must be drilled to a depth of 2-1/2"....
Schlage Commercial » Ives
If a continuous hinge, like a 112HD makes a "popping" sound when door is opened, what would that be?
Either way, this hinge is making noise and the #1 cause is installation related.  If it is installation related it can often be narrowed down to one of the below. 1. screws not going ...
Schlage Commercial » Ives
Can a 24" FB458 rod be cut down to 18"?
The extension rods are all threaded, so they can be cut down.The standard 12" rod is not fully threaded and would not be able to be cut. The turning of the bolt is the fine adjustment. Please ...
Schlage Commercial » Glynn-Johnson | Schlage Commercial » Ives
Can a "Adjusta-Studs " be used with a 700 hinge, or is it just for use with a 705 hinge, per the bottom of page A26 of catalog?
The Adjusta Studs are used when the frame is not true and plumb. The 705 also has the overlapping metal edges to hide the odd an uneven gaps that make adjustastuds necessary. ...
Schlage Commercial » Ives

Support by product