Category: Ives

(Results from 21 to 30)
Is it possible to convert the Ives long door pulls between straight and offset mounting?
This is not recommended.  The stand-offs are secured with red Loctite so they stay affixed to the pull.  However, it is possible to order the stand-offs as an engineering special if someone ...
Ives |
Are preps for other manufacturers' power transfers available on Ives continuous hinges?
Yes, at an additional charge, as an engineering special with extended lead times....
Mechanical Accessories » Hinges & Pivots » Ives | Ives
What is the threaded post material for the Ives FS18 floor stop?
Zinc plated steel...
Mechanical Accessories » Stops, Bumpers & Silencers » Ives | Ives |
Can a hinge pin door stop be used with the 3SP1 spring hinge?
The 3SP1 commercial spring hinge does not have a hinge pin design that will accommodate a hinge pin door stop. Please note: hinge pin door stops are intended for use in residential applications....
Mechanical Accessories » Hinges & Pivots » Ives | Mechanical Accessories » Holders and Stops » Ives | Ives
Is there a replacement screw package for the Ives 705 hinge?
The screw packs that come with the 705 hinge come with all fasteners needed for wood and metal applications including adjustable studs as needed. This single screw pack is not sold as ...
Mechanical Accessories » Hinges & Pivots » Ives | Ives
Is the strike for the FB457/FB458 available as an item to purchase?
The strike is only available with the FB457 / FB458 purchased complete.  It is not available as an individual item....
Mechanical Accessories » Flush Bolts and Coordinators | Mechanical Accessories » Flush Bolts and Coordinators » Ives | Ives
What is the diameter of the O-mount Ives fastener?
The diameter of the O-mount fastener is 1.25"...
Mechanical Accessories » Push & Pull Plates | Ives
What electrified options and accessory items are permitted for use with exit devices on hurricane assemblies?
Hurricane rated Von Duprin and Falcon exit devices, when used as part of approved Allegion assemblies, are permitted to have electrified options such as these, where applicable: electric latc...
Glynn-Johnson | Ives | LCN | Von Duprin
What is the difference between N mounting and J mounting for door pulls
Both the N and J mounting are the same type of mounting in that they are both back to back mountings, but they are different sizes.  The J mounting uses a size 5/16-18 screw, while the N mounting...
Mechanical Accessories » Push & Pull Plates » Ives | Ives
Can the extension rods for FB457 & FB458 be used on FB30/50 extension rods
Both the FB457/FB458 and FB30/50 flush bolts use 1/4-20 threaded rods.  Although the rods supplied for the FB30/50 are not all thread, the extension roads will work for either flush bolt.  N...
Mechanical Accessories » Flush Bolts and Coordinators | Mechanical Accessories » Flush Bolts and Coordinators » Ives | Ives