Category: Falcon

(Results from 71 to 80)
What is "nightlatch" vs "holdback" for the Falcon Doromatic exit devices?
Nightlatch requires the rim cylinder for entry each time.  Turning the rim cylinder key retracts the latchbolt.  Upon removing the key, the devcie will relatch to the strike.  Hold back...
Schlage Commercial » Falcon
What Falcon MEL literature resources are available?
From the home page of us.allegion.com, in the upper right hand corner, click on the magnifying glass, then enter the document number in the search bar.• Falcon MEL Data Sheet 012500• Falcon 24/25 ...
Schlage Commercial » Falcon
Is there a Falcon MEL conversion kit, or does the complete device have to be replaced?
• There is a conversion kit for mechanical Falcon 24/25 devices (except mortise devices,which are not compatible with MEL).• The conversion kit cannot be used on EL devices. To convert an EL devic...
Schlage Commercial » Falcon
Are the Falcon 250, 251, 252 or 253 cylinders available in a Schlage "C" keyway?
The 250, 251, 252 and 253 are not offered in Schlage keyways or any other competitor keyways...
Schlage Commercial » Key Systems | Schlage Commercial » Falcon
What mechanical dogging options are available with MEL device?
The MEL is furnished with a blank channel cover plate.  There is no option for hex key or cylinder dogging with the MEL device.  The motor occupies the area where mechanical dogging componen...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Falcon
What electrical options are available in conjunction with MEL device?
RX, LM, DM, FSA/FSE, and Allegion Connect (CON) are available with MEL. EA is not available with MEL. This info accurate as of March, 2019.  Always check latest product information at us.all...
Schlage Commercial » Exit Devices » Touch Bar | Schlage Commercial » Falcon
Since there is a field installable MEL kit and a field installable RX switch kit, can both be field installed on the same device?
     Yes, the field installable MEL kit and RX switch kit can be installed on the same device.  Note that LM and DM switches are never field installable options.  They must be...
Schlage Commercial » Exit Devices | Schlage Commercial » Falcon
What are common troubleshooting issues and solutions for MEL device?
The installation instructions 941367 have common troubleshooting steps such as these:  ·        Check mechanical function (including vertical rod adjustment,...
Schlage Commercial » Exit Devices | Schlage Commercial » Falcon
Are the SC60A-18 and SC90A-18 drop plates the same?
Yes, these plates have the same mounting hole dimensions and the cylinders (SC61A, SC93A, and SC94A) have the same hole pattern of 3/4" X 9 1/16".Please Note:  The plates are the same but th...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » Door Controls » Surface Mounted » SC60 Series | Schlage Commercial » Door Controls » Surface Mounted » SC60 Series » Falcon | Schlage Commercial » Door Controls » Surface Mounted » SC90 Series | Schlage Commercial » Door Controls » Surface Mounted » SC90 Series » Falcon | Schlage Commercial » Falcon | Schlage Commercial
How can you identify if an OHC100 cylinder is a 90 degree or a 105 degree?
The degree of opening of the cylinder is stamped on the end of the pinion/cylinder shaft (where the arm attaches to closer).  ...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Concealed | Schlage Commercial » Door Controls » Concealed » OHC100 Series | Schlage Commercial » Door Controls » Concealed » OHC100 Series » Falcon | Schlage Commercial » Falcon | Schlage Commercial

Support by product