Category: Falcon

(Results from 1 to 10)
How do I re-hand the M lock?
The lock case can be re-handed, however, this requires opening up the lock case. See M lock re-handing instructions for a complete guide. These instructions are also found in the Falcon M Series...
Schlage Commercial » Falcon
What was the difference between the Kim and Sutro lever for the M lock?
The Falcon M lock had 2 lever styles that were very similar in appearance; the Kim and Sutro, both levers were dimensionally the same.   The Kim lever was l...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Falcon
Can I get Falcon locks in a 612 finish?
Effective Feb 25, 2008 Falcon no longer offer a 612 finish on any product....
Schlage Commercial » Falcon
MA launch information
The MA was launched 4/1/10 and replaced the Falcon M lock. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Falcon
Does Falcon have a sample finish ring?
SET OF FINISH SAMPLES Part number "20" One (1) of each finish on 1-1/4" diameter disks attached together with a bead chain. Finishes Included: 605, 606, 613, ...
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Falcon
What is the control bitting for Falcon 0 bitted cores?
A zero bitted or 1 bitted Falcon SFIC core is combinated for the control key to be cut at all 4's. The 0-bit & 1-bit option was eliminated as of June 25th, 2022.  ...
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Falcon
How do I retro fit the 2390 into the 1390 muntin?
Replace the device and vertical rods with the current 2390 device and possibly a filler plate. A filler plate may be needed as the older 1390 device was sized per order whereas the 2390 is only o...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Falcon
Will a Falcon cylinder work in a Schlage lock?
   Hotel cylinder in L9000 The Falcon Hotel cylinders will not work in the Schlage hotel function lockset (L9485, L9486).  ...
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Falcon
How are interchangeable cores installed?
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an inte...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Key Systems » Keys » Keys » Falcon | Schlage Commercial » Key Systems » Keys » Keys » Schlage | Schlage Commercial » Falcon
Are parts still available for the old Falcon M locks?
Related solution: What is the part number for the lever return spring for the old M series mortise lock?...
Schlage Commercial » Falcon