Category: Schlage Electronics

(Results from 1 to 10)
692 Smart Bar trouble shooting
Verify power input lines have 12 or 24 volts DC. Power up the 692, several self test beeps should occur and the internal relay will cycle then it will become silent In normal operation breaking th...
Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics
Does the 672 / 692 REX require the 788-12 / 788-18 door loop?
Yes, 672/692REx required the 788-12/18 door loop or at least 4 wire electric hinge or Von Duprin EPT10.In addition, because they are surface mounted and do not affect the rating of the ...
Schlage Commercial » System Components » Door Cords » 788 Series » Schlage Electronics | Schlage Commercial » System Components » Door Cords » 798 Series » Schlage Electronics | Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics | Schlage Commercial » System Components » Touch bar » 672 » Schlage Electronics
What is the DPDT for the 672/692?
DPDT is double contacts push bar monitor switch. Double Pole Double Throw...
Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics | Schlage Commercial » System Components » Touch bar » 672 » Schlage Electronics
Does the 672 touch bar require a power supply?
No, 672 does not require power supply. It simply serves as a switch (REX) mechansim....
Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics | Schlage Commercial » System Components » Touch bar » 672 » Schlage Electronics
Part numbers for on the 692 Smartbar and 672 touch bar components
Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics | Schlage Commercial » System Components » Touch bar » 672 » Schlage Electronics
Will the end cap from a 672 or 692 REX Touch bar fit the old 671 Touch bar?
NO: End caps for the 672 & 692 REX Touch bars are not compatible with the 671 Touch bar....
Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics | Schlage Commercial » System Components » Touch bar » 672 » Schlage Electronics
Is the 692 SmartBar or 672 Touch Bar handed?
The only handing on a  692 is the pushpad lettering that is assembled into the correct side based on handing.The 692 can be re-handed in the field if necessary; see page H12, section 5 for re-han...
Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics | Schlage Commercial » System Components » Touch bar » 672 » Schlage Electronics
Repalcement parts for Schlage Electronics 672 TouchBar and 692 SmartBar
See attached table: Schlage 692/672 Parts Cross ref...
Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics | Schlage Commercial » System Components » Touch bar » 672 » Schlage Electronics | Schlage Commercial » Von Duprin
What replaced the Legacy Locknetics Touch Sense, Touch Bar, or Smart Bar Request to Exit devices?
What replaced the Legacy Locknetics Touch Sense, Touch Bar, or Smart Bar Request to Exit devices? Current Allegion Schlage Request to Exit devices replaced the Legacy Locknetics Request to Exit devic...
Schlage Commercial » System Components » Smart bar | Schlage Commercial » System Components » Smart bar » 692 | Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics | Schlage Commercial » System Components » Touch bar | Schlage Commercial » System Components » Touch bar » 672 | Schlage Commercial » System Components » Touch bar » 672 » Schlage Electronics
How do I install a 692 touchbar
Install Guide 692...
Schlage Commercial » System Components » Smart bar » 692 » Schlage Electronics

Support by product