On the M490DEP are the wires going to the Alarm, opened or closed?
Alarm is an OUTPUT. The contact closes when the lock goes into full alarm.
When lock is not in alarm, the contacts are open
...
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
On the M450P, does this indicator light come with the lock?
No, it is in a kit sold separately (ATS/LED kit) and the lock must be a Plus "P" version to use this kit. This can be ordered separate and installed in the field....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
What size screws are used with the M490 mag locks?
Inside mounting bracket screws are USS 10-24 x 1/2"
Outside mounting bracket screws are USS 10-32 X 3/4"
Magnet Screws - Are 1/4 - 20 thread 3/16 hex total length 2 ¾
Cover Plate Screw ...
Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
Using the M490DEP, does the door prop time reset with each card swipe?
Yes, the 20 second timer will restart, once the release contacts are reopened....
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
Can you wire a M490DEP for card reader on both sides of the door into RLS/RST?
Yes, you can wires in 2 readers, inside and outside reader in parallel to the M490DEP.
...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
Can the circuit board for the M400 series maglock be by-passed?
No, you cannot bypass the circuit board on the M400 series maglocks.
The circuit board has a voltage/surge protection built into the circuit board
...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics
Does Schlage offer spacers for Maglocks?
No we do not offer spacers for Maglocks. They must be sourced separately or fabricated. However, we do offer filler plates and angle brackets in various sizes to accommodate different types of door ...
Schlage Commercial » System Components » Electromagnetic Locks » Accessories | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics | Schlage Commercial » Schlage | Schlage Commercial » Schlage Electronics
Where is the DPS located on the M490P?
It is located behind PCB board between the board and the access cover.
...
Schlage Commercial » System Components » Electromagnetic Locks | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics