Category: Schlage Electronics

(Results from 1 to 10)
Gauss reading for GF3000
The magnetic gauss reading (magnetic flux for the armature) is 20 gauss at 1.5 inches from armature all around it and no gauss reading after 2.5 inches....
Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics
GF3000 with reversed polarity
GF3000 with reversed polarity will not have a relock delay, which means it will not have a thirty second delay, it will still lock but instantly.This may potentially damage the module and not app...
Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics
What is the nearest functional replacement for the Max hold SL4110 Mag lock
No direct replacement, but GF3000 would be the closest....
Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics
GF3000 coil does not float
Current production GF3000 have a fixed , solid coil. Previous models excluding the BRD had spring load floating coils. This allowed the coil to drop and meet the armature, Engineering is reviewing t...
Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics
GF3000 Power Supply
At 12 vdc  2  GF3000's will need  1.8 amps , lvery close to the PS902 supplies limit. If running at 24 vdc  technically 4 units would draw 1.8 amps . A limit of 3 would be better...
Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics
What mag lock replaced the former Von Duprin 700?
There is not a direct replacement for the old Von Duprin 700 Shear Lock series mag lock.The Von Duprin 700 had been replaced by the old Locknetics 280-700, which has also since been discontinued, and ...
Schlage Commercial » System Components » Electromagnetic Locks » 280+ Series | Schlage Commercial » System Components » Electromagnetic Locks » 280+ Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series | Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics | Schlage Commercial » Von Duprin
GF3000 Control Module part number information & Diagnostic test
GF3000 Control Module part number information & Diagnostic test informationGF3000 control module:  (as of February 2016) - Part Number: P280130-2- List on the P280130-2 is $31...
Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics
Why is there a control module on the GF3000 maglock?
The GF3000 control module takes in 12 or 24 volts DC and puts out a lower voltage pulsed signal to the magnetic coils.The reason for the control module is to run the magnetic coil at a cooler temperat...
Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics
If power is cycled to the GF3000, does the automatic time delay default to factory?
Adjustable Time Delay (ATD):  Power cycling will not revert the delay to the default value.The ATD must be set back to the default.Adjustable Time Delay (ATD)The ATD provides a time delay to relo...
Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics
Will mag locks operate with voltage ranges between 12vdc and 24vdc?
The entire series of mag locks that Schlage provides advertises 12vdc or 24vdc because they will automatically determine what voltage is being used and switch the internal circuitry based on that volt...
Schlage Commercial » System Components » Electromagnetic Locks » GF3000 Series » Schlage Electronics | Schlage Commercial » System Components » Electromagnetic Locks » M400 Series » Schlage Electronics