EN-100/EN-200 Ethernet Upgrade Tech Note (05/2011)
EN-100/EN-200 Ethernet Upgrade (05/2011)...
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
What does a Warning 80 or 17 mean on a F-Series hand reader?
When you see a Warning 80 or Warning 17 on a HandKey or a
HandPunch, it may mean that the lithium battery is low. The
first step is to try a warm boot on the reader to see if that help...
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
What does error 64 mean on a HandKey II or Handpunch?
When you see an Error 64 on a HandKey or a HandPunch, it may mean that the lithium battery is low or there is a disconnect with main board. The first step is to replace the lithiu...
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
How do you find the serial number of a biometric F-Series handpunch or Handkey II?
Yes, press the * (asterisk) key 10 times on the reader. The serial number will be displayed. A second way of locating the serial number on the reader is to visually check th...
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
How many users can a HandPunch 1000E hold?
The biometric F-Series HandPunch 1000E can only hold 100 users and is not expandable....
Schlage Commercial » Biometrics » HandPunch » HP 1000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
How many users can a HandPunch 2000 hold?
The biometric F-Series HandPunch 2000 can only hold a maximum of 512 users and is not expandable. ...
Schlage Commercial » Biometrics » HandPunch » HP 2000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
What should I do when my F-Series HandPunch is indicating "Memory Full"?
The F-Series HandPunch will display "Memory Full" when the number of transactions being stored on the hand reader exceed its memory capacity. When the memory capacity is exceeded, the hand reader wi...
Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
What wiring is needed for the HandPunch?
The HandPunch can be hard wired for communications using RS-485, RS-422, or RS-232. Using RS-485 or RS-422 requires a data converter. The data converter part numbers are DC-102 (4-wire) or...
Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
How do you get the camera calibration values on a biometric F-Series HandPunch?
To get the camera calibration values on a biometric F-Series HandPunch or F-Series HandKey, press the * (asterisk) key 11 times. It will display R (row), C (column), and E (exposure)&nb...
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
What is the difference between a warm boot and a cold boot on a biometric handreader?
A warm boot on a biometric handreader resets the handreader to factory default settings but does not erase the user database. A cold boot on a biometric handreader resets the handreader to factory d...
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics