Can the EN-200 ethernet module be installed in the field?
Yes, the EN-200 ethernet modules can be installed in the field. In 2010, an ethernet conversion kit was created to be used with the F3 version of the HP-2000 hand reader. The only cases wh...
Schlage Commercial » Biometrics » HandKey » HandKey CR » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 1000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 2000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 4000 » Schlage Electronics
What are the memory options on the HandPunch?
Hit the * key 10 times and then hit # 4 times. It will show either 128k, 256k or 512k.
128K hold 512 users
256k holds 9728 users
512k holds 32,512 users...
Schlage Commercial » Biometrics » HandPunch » HP 1000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 2000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 4000 » Schlage Electronics
Can you use hand sanitizer on HandPunch reader?
They can use hand sanitizers but they need to make sure it is AFTER they scan in. Sanitizers can and will cause issues with the platen.
Plus all handreaders have a built in anti-microbial as ...
Schlage Commercial » Biometrics » HandPunch » HP 1000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 2000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 4000 » Schlage Electronics
How do you enroll on a HandPunch?
•If nobody is enrolled-At the “Ready” prompt, enter command mode by pressing “Clear” and then “Enter”.
•If Users are enrolled already- At the “Ready” prompt, enter command mode by...
Schlage Commercial » Biometrics » HandPunch » HP 1000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 2000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 4000 » Schlage Electronics
How do you get IP address on a HandPunch reader?
All HandPunch readers need a static IP only. To get the current ip you can do it 2 ways:
1. Reboot the reader and make sure the Ethernet line is plugged in and note the IP that gets displayed...
Schlage Commercial » Biometrics » HandPunch » HP 1000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 2000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 4000 » Schlage Electronics
How to change the time format from 24-hour (military style) to 12-hour (am/pm) on the Handpunch
The time display will default to 24 hour military time. Changing to 12 hour am/pm is a function of the Time & Attendance software....
Schlage Commercial » Biometrics » HandPunch » HP 1000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 2000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 4000 » Schlage Electronics