Category: Schlage Electronics

(Results from 1 to 10)
SMS Software Patch for New Models of CL Encoder Shipped After March 2009
New models of CL Encoders shipped after March 2009 will not work with the current software of any SMS version (Select, Premiere, or Enterprise) of 5.2 or higher. There is a patch for this to make...
Schlage Commercial » Electronic Locks » Offline » AD 250 Series » Schlage Electronics | Schlage Commercial » Security Management » Schlage Electronics
Why do I get the following error "Error Too Many Repeated Pages" when trying to program my lock using Uplink?
If you are no able to program the your CM or CL lock using the Uplink please check the following. Make sure time and date is correct on the lock. Make sure the lock is being put into program...
Schlage Commercial » Security Management » Schlage Electronics | Schlage Commercial » Software » Schlage Express » Software » Schlage Electronics
Can I have 2 Offline Credentials with the same Encoded ID?
Yes you can 2 Offline Credenitals in SMS, However the credentials can not have the same function or keypad number....
Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 250 Series » Schlage Electronics | Schlage Commercial » Security Management » Schlage Electronics
Where do I put the Active Sync directory path so that my door files are sync with my PDA on Schlage Express?
To change your Program Files folder for SMS Express Open Schlage Express go to Settings and select Program Settings. Go to the Programming tab Click on Locks will be programmed with a Pockect PC ...
Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 250 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CL Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CM Series » Schlage Electronics | Schlage Commercial » Security Management » Schlage Electronics | Schlage Commercial » Software » Schlage Express » Software » Schlage Electronics
How do I reset my HHD?
Hard Reset: Remove Battery cover Holding SEND key + OK Key for 5 seconds after reset button....
Schlage Commercial » Electronic Locks » Networked » AD 300 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Networked » WA Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 250 Series » Schlage Electronics | Schlage Commercial » Security Management » Schlage Electronics
Is the coin cell battery used on the AD300 or AD400 locks?
The coin cell is not used  in an on-line lock. The AD200/AD250 locks only use the coin cell battery to mainatain the real time clock during AA battery changes. The WRI400, AD300 and AD400  d...
Schlage Commercial » Security Management » Schlage Electronics
How to reset a CT5000?
To reset a CT5000 back to factory defaults use the following steps: Press and hold both the SCHLAGE and LINK buttons for approximately three (3) seconds.   When the POWER/TAMPER LED turn...
Schlage Commercial » Security Management » Schlage Electronics | Schlage Commercial » Software » Schlage Express » Software » Schlage Electronics
Wiring for the MR 10 and MR 20 magstripe readers
Download Link for:   SMR10 & SMR20 Magnetic Stripe Readers Spec sheet informationDownload Link for:  Wiring & Install Guide SMR10 & SMR20 Magnetic Stripe ReadersDownload Lin...
Schlage Commercial » Readers » Magnetic Stripe Readers » SMR Series » Schlage Electronics | Schlage Commercial » Security Management » Schlage Electronics
Can we read the secure sector of the iClass cards using the AD Series Lock
As of today 11\11\11 we only can read the card serial number of the iClass when using the XceedID reader or any AD Series lock (AD300-AD400-AD200..etc)....
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Security Management » Schlage Electronics
Can we set up the WRI-400 on cache mode
Yes, we can set up the WRI-400 lock to work as a cache mode just like the AD400 locks. They will need to go to door settings and set up the card format they are using....
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Security Management » Schlage Electronics