What is the voltage range for the MTB readers?
The voltage range for the MTB / MTKB readers have been updated from 5v -16v to 5v - 28v.
...
Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Can the MT11/MT15 Wiegand readers be configured in the field to be 485?
No, the readers are not configurable in the field. They need to be purchased as RS485 reader
The new MTB11/MTB15 readers have wiegand and 485 enabled by default.
...
Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Are all CTEs able to pair with MTB readers?
Yes, you can pair an MTB reader to any of the CTE controllers.The firmware must be updated to the latest version on the older CTE's for it to work with the bluetooth credentials.To pair the reader to ...
Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics | Schlage Commercial » Electronic Locks » CTE
What’s the difference between OSDP and OSDP Secure?
The readers:
MT15-485 and MT11-485
MTB15 (when using the 485)
Support OSDP secure (encrypted) or open. This is controlled by the Access Control system.
...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
How can I tell if my MT reader has passed or failed the power cycle sequence?
On power up, if the reader responds with multiple beeps then goes to a solid red LED, this indicates the smart circuit portion of the reader failed and needs to be replaced.
Otherwise a good rea...
Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
How do I change the track on an MTMS15 magstripe reader?
Power cycle the reader, wait for the beep then present configuration card to the reader within 60 seconds (see chart below for config cards).
...
Schlage Commercial » Credentials » Magnetic Stripe | Schlage Commercial » Readers » Magnetic Stripe Readers | Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
How can I commission a MTB to an Engage site when not listed.
You cannot commission an MTB reader to a standalone Engage account.
You will not see the option to select an MTB reader.
The MTB needs to be commissioned to a Partner (PAC) site.
...
Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Can the RSO update MTB readers (firmware) with a profiler, like they would on an MT reader?
Profilers do not work on MTB readers, MTB reader firmware is updated through Engage, so you would need to commission the reader to a partner site then connect and update firmware. MTB reader firmwar...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
What is the part number for the MTB reader cover single gang in black?
Single gang cover in black Schlage Bluetooth Logo: 47317564
Mullion cover in black Schlage Bluetooth Logo: 47317558
...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics