Category: Schlage Electronics

(Results from 21 to 30)
What does "LNL" mean on an Schlage reader part number?
The prefix "LNL" before an aptiQ reader part number represents the purchaser is Lenel.  This prefix also indicates that the aptiQ reader will have a "LENEL" brand label on the front cover instead...
Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics | Schlage Commercial » Readers » Proximity » PR 10 | Schlage Commercial » Readers » Smart Card » SM 10
Can I flush mount Schlage MT series card readers?
The reader has curved edges, so it cannot be flush mounted....
Schlage Commercial » Readers | Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
MT20w Enrollment Reader and Third-Party Credentials
No you cannot use the MT20W to enroll third party credentials.  The reader is only compatible with Schlage provided and programmed Mifare Classic and EV1 credentials. ...
Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics | Schlage Commercial » Readers » Enrollment » MT20W
Schlage MT15 and MTK15, Revision 22 Firmware and Sony Felica Credentials
No.  Previous revision 20 firmware is, however, compatible with Felica credentials....
Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Using a MTK-15 with an 8 bit burst, do you have to press “#” when done putting in your access code?
This depends on the Access Control Panel, the reader is sending data with every press, so it's up to the Access Control Panel whether it needs the “#” or not....
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
What is configuration CE-000-001 used for?
CE-000-001 is our default reader configuration part number. This configuration cards cannot be ordered. If you need to default your card reader, you will have to send it in to us to default ...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics | Schlage Commercial » Readers » Smart Card
Do all of the Allegion readers use RFID (radio Frequency Identification)?
Yes, and they are also ISO14443 standard compliant....
Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Why is my access control not seeing the read from my card on a OSDP connection?
We don't use secure OSDP, the controller will need to be set to open and then they should be able to see the data. ...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
Do the new MTB readers have to be ordered as 485 to have this connection?
All MTB readers include 485 and Wiegand connections.You do not have to specify 485 when ordering....
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics
What is the voltage range for the MTB readers?
The voltage range for the MTB / MTKB readers have been updated from 5v -16v to 5v - 28v. ...
Schlage Commercial » Readers » Multi-Technology » MTSeries | Schlage Commercial » Readers » Multi-Technology » MTSeries » Schlage Electronics

Support by product