Category: Von Duprin

(Results from 11 to 20)
Was the old Von Duprin PS871 power supply replaced by the PS873-2?
The Von Duprin PS873-2 power supply replaced the old Von Duprin PS871 power supply. The Von Duprin PS914-2RS power supply replaces the PS873-2 or PS871 power supply and is currently the supply re...
Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Are you able to operate a mag lock or shear lock off of the 873-4TD card?
You can operate up to four maglocks off of the 873-4TD option board....
Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?
 ...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Will the 871-2Q operate the Von Duprin EL device?
The 871-2Q or 900-2Q will operate the Von Duprin EL devices....
Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
What is the power output of a 4600 operator?
The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device "always" has to have a separate PS914-2RS Series ...
Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series » LCN | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Does Von Duprin have a repair department?
Von Duprin and Falcon do not offer repair services for any of its exit devices....
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin | Schlage Commercial » System Components » Electric Strikes » 4000 Series » Von Duprin | Schlage Commercial » System Components » Electric Strikes » 5100 Series » Von Duprin | Schlage Commercial » System Components » Electric Strikes » 6000 Series » Von Duprin | Schlage Commercial » System Components » Electric Strikes » 6300 Series » Von Duprin
Why is my Von Duprin QEL light flashing red and green?
Check to make sure there is no bind of the latch....
Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Is the 871-2Q board required on QEL devices when using the PS 873 AO to operate my QEL devices?
The QEL exit devices that were shipped prior to August, 2012 will only communicate to the PS873 with 871-2Q option board or PS900 series with 900-2Q option board. If you ar...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Can the 8200 power an EL panic device?
The 8200 can not supply the power needed on an EL dev ice. The EL device requires a Von Duprin PS914-2RS or PS914-4RL power supply or the older Von Duprin PS873-2 or PS873-4TD models....
Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Where are the Data sheets or Installation Instructions for the 900 series Power Supplies?
Data sheets and installation instructions for 900 series power supplies are available at http://us.allegion.com/Services/TechSupport/Pages/home.aspx?ps=Electronic%20Security&pc=Electronic%20L...
Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin

Support by product