Category: Schlage

(Results from 1 to 10)
What are the current and voltage requirements of the 10-042 strike?
Product has been discontinued. The 10-042 is an electric strike used for cylindrical and tubular latch sets. VOLTAGE 24 VAC 12 VDC AMPERAGE 0.74A0.33A  FREQUENC...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What is included in the 39-030 rabbeted latch and strike kit?
39-030 can be used on the A, AL, B250, B500, B600, D, ND, S products.This kit adapts a square corner latch and a 2 3/4" high square corner strike to 1/2" rabbeted door and frame preparation.  39-...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What is the door-to-lever tip distance on the S Jupiter lever?
The lever return distance (tip of lever to door face) on the Jupiter lever design is approximately 1-3/4"....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
Is the CS200, S200, or S locks available in SFIC?
The CS200, S200, and S-Series is not available with the small format interchangeable core option....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
Can the S170 be installed back to back?
The S170 can not be installed back to back.   ...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What is the part number for a privacy emergency key?
M504-271 is the emergency key used to open a locked S40....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
Explain the function for the Schlage S80 storeroom lock.
The S80 requires a 90° key rotation that enables the outside lever to be rotated to retract the latch. When the key is removed, the outside lever is once again locked....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What are the steps to remove an S lock from the door?
Remove the inside rose then remove the two mounting screws and the inside and outside chassis will come off the door.  See Installation Instructions here....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
Is the 612 finish offered in the S Series?
Discontinued in 2010....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What is the part number for the driver for a FSIC on an S lock?
The part number is S605-242....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage

Support by product