Explain the function for the Schlage S80 storeroom lock.
The S80 requires a 90° key rotation that enables the outside lever to be rotated to retract the latch. When the key is removed, the outside lever is once again locked....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
What are the steps to remove an S lock from the door?
Remove the inside rose then remove the two mounting screws and the inside and outside chassis will come off the door. See Installation Instructions here....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
Does the S series offer a 3 1/2" rose?
The S and S200 rose is 2-9/16" in diameter only....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
How does the S51 operate?
The S51 is a tubular entrance lock with a key outside and a turn button on the inside.
Function: Unlocked by key from outside when outside lever is locked by turn-button in inside lever. Inside lever...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
Does the S200 cylinder require a sleeve for installation?
The S-Series and S200-Series outside keyed spindle was redesigned in September 2008. For locks manufactured BEFORE September 2008 The S and S200 lever cylinders required cylinder sleeve S605...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
What is the part number for the latch adapter used with 1" face plates for 1-1/8" prep?
Schlage offers a face plate adapter to adapt 1" face plate to 1 1/8" door
preparation, part number is A501-878.
...
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
What is a bent tab strike?
The purpose of a bent tab is so that if you experience door rattle, the tabs can be bent back slightly (toward the open area) so that the tab holds the door tightly against the doorstop/mold...
Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » LT Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » K Series (Falcon) - Discontinued | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series | Schlage Commercial » Mechanical Locks » Mortised » HL6 9000