Category: S-Series

(Results from 11 to 18)
Is the 612 finish offered in the S Series?
612 is not offered in the S or S200 series....
Mechanical Locks » Tubular / Interconnected » S200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What is the minimum stile for Schlage locks?
The minimum stile for each lock will depend on the backset and the rose diameter/escutcheon width.  See the Schlage Minimum Stile Requirements for the minimum stile for each l...
Mechanical Locks » Cylindrical » A Series » Schlage | Mechanical Locks » Cylindrical » AL Series » Schlage | Mechanical Locks » Cylindrical » D Series » Schlage | Mechanical Locks » Cylindrical » ND Series » Schlage | Mechanical Locks » Deadbolts » B Series » Schlage | Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Mechanical Locks » Mortised » L400 Series » Schlage | Mechanical Locks » Mortised » L9000 Series » Schlage | Mechanical Locks » Mortised » LV9000-Series » Schlage | Mechanical Locks » Tubular / Interconnected » H Series » Schlage | Mechanical Locks » Tubular / Interconnected » S200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage | Schlage
What is the part number for our AL series electric strike?
Schlage offers the 10-042 Electric strike, 1 1/4" x 4 7/8", 606 and 626 finish only. Related solution: What are the current and voltage requirements of th...
Mechanical Locks » Cylindrical » A Series » Schlage | Mechanical Locks » Cylindrical » AL Series » Schlage | Mechanical Locks » Cylindrical » D Series » Schlage | Mechanical Locks » Cylindrical » ND Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What is the part number for the driver for a FSIC on an S lock?
The part number is S605-242....
Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
Does the S series offer a 3 1/2" rose?
The S and S200 rose is 2-9/16" in diameter only....
Mechanical Locks » Tubular / Interconnected » S200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
How does the S51 operate?
The S51 is a tubular entrance lock with a key outside and a turn button on the inside. Function: Unlocked by key from outside when outside lever is locked by turn-button in inside lever. Inside lever...
Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
Does the S200 cylinder require a sleeve for installation?
The S-Series and S200-Series outside keyed spindle was redesigned in September 2008.   For locks manufactured BEFORE September 2008    The S and S200 lever cylinders required cylin...
Mechanical Locks » Tubular / Interconnected » S200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What is a Grade 2 Lock?
Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 400,000 Certified Cycles ANSI/BH...
Mechanical Locks » Cylindrical » B Series » Falcon | Mechanical Locks » Cylindrical » W Series » Falcon | Mechanical Locks » Cylindrical » A Series » Schlage | Mechanical Locks » Cylindrical » AL Series » Schlage | Mechanical Locks » Deadbolts » D Series » Falcon | Mechanical Locks » Deadbolts » B Series » Schlage | Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » H Series » Falcon | Mechanical Locks » Tubular / Interconnected » Y Series » Falcon | Mechanical Locks » Tubular / Interconnected » H Series » Schlage | Mechanical Locks » Tubular / Interconnected » S200 Series » Schlage | Mechanical Locks » Tubular / Interconnected » S-Series » Schlage | Schlage