What is a Grade 2 Lock?
Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards:
Cylindrical, Bored and Preassembled Locks & Latches
400,000 Certified Cycles
ANSI/BH...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series (Falcon) | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Deadbolts » D Series (Falcon) | Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage) | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series (Schlage) - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » Y Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
Can I order ANSI / ASA strikes with Interconnected locks?
The CS210, H2101 and H2171 interconnect locks have not be tested or certified with ANSI/ASA strikes, therefore the use of ANSI/ASA strikes with the lock would invalidate any UL rating and warranty for...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued
What is an interconnected lock?
Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently
Medium duty
Commercial, government or multi-fam...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series (Schlage) - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued
Does the S200 cylinder require a sleeve for installation?
The S-Series and S200-Series outside keyed spindle was redesigned in September 2008. For locks manufactured BEFORE September 2008 The S and S200 lever cylinders required cylinder sleeve S605...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
Does the S series offer a 3 1/2" rose?
The S and S200 rose is 2-9/16" in diameter only....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
Is the 612 finish offered in the S Series?
Discontinued in 2010....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series
How does the Schlage S210 interconnect lock operate?
Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Latch retracted by lever from either side. Turning inside lever retracts deadbolt and...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued
What is the grading for S200 and H series locks?
Neither lock has a BHMA grade....
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series (Schlage) - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued
Why won't my lever retract the latch on an S200?
Latch retraction issues at time of installation could be caused by incorrect handing of the lock chassis. Move the driver to one of the following positions as indicated below:
...
Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued