Why does my display on HandKey show C0000 HHHH
You have status display turned on. Go into password menu 1 and go into Status Display and turn it off....
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
EN-100/EN-200 Ethernet Upgrade Tech Note (05/2011)
EN-100/EN-200 Ethernet Upgrade (05/2011)...
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
Is the HKII UL listed
The HandKey II meets UL compliance requirements for UL294 Access Control Systemsunder the following conditions:
The HandKey II is configured at the factory with a Wiegand output that enables the Hand...
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics
What should I do when my F-Series HandPunch is indicating "Memory Full"?
The F-Series HandPunch will display "Memory Full" when the number of transactions being stored on the hand reader exceed its memory capacity. When the memory capacity is exceeded, the hand reader wi...
Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
How do you turn a Handkey to Time/attendance mode
T&A feature can be enabled the on a HK2 via password menu 2 and after SET ID LENGTH. Hit yes for T&A MODE....
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics
What wiring is needed for the HandPunch?
The HandPunch can be hard wired for communications using RS-485, RS-422, or RS-232. Using RS-485 or RS-422 requires a data converter. The data converter part numbers are DC-102 (4-wire) or...
Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
How do you get the camera calibration values on a biometric F-Series HandPunch?
To get the camera calibration values on a biometric F-Series HandPunch or F-Series HandKey, press the * (asterisk) key 11 times. It will display R (row), C (column), and E (exposure)&nb...
Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » HandPunch » HP 3000 » Schlage Electronics
Handnet for Windows user database bug - windows 7
This is a known bug and currently has no resolution. If Handnet for Windows is initially installed on Windows 7 and the user enrollment is started/initiated on Windows 7, there are no issues.You can t...
Schlage Commercial » Biometrics » HandKey » HandKey CR » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » HandKey II » Schlage Electronics | Schlage Commercial » Biometrics » HandKey » ID3D » Schlage Electronics | Schlage Commercial » Biometrics » Software » HandNet for Windows » Schlage Electronics