How do I order a lock for a non-standard or thick door?
Most locks will have a standard door range they will install on, but occasionally customers will want to use them on thicker doors. In order to do so, the extended door thicknes...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series (Falcon) | Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage) | Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Can a thumbturn cylinder be used on the L9453?
A thumbturn cylinder will not provide the intended operation. The L9453 requires the actual thumbturn hub to be rotated the additional 20° to unlock the outside lever once the deadbolt has been...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Is the Schlage Latitude and Longitude lever available in a stainless steel finish?
Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What is Vandlgard?
Vandlgard is specified by "LV" for mortise locks. The L9000 is a mortise style lock that mounts into a pocket mortised into the edge of the door. Vandlgard is specified by ND9x function...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
What other locks can the blue lever removal tool 24002693 be used with?
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series and...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What can be ordered if a no lip strike is required for the L9000?
The L-Series standard strike is the 10-072 and the available lip lengths are listed below. 7/8" (Flat or straight lip) See picture below.1"1 3/16" (Standard for 1 3/4" doors)...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What is the size of the L9000 spindle?
All spindles are on a "square" at 0.312" (5/16")...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Does Schlage have a mortise coin turn cylinder?
The 09-487 is the Schlage coin turn cylinder. Not available with any lock function and must be entered as a separate line item. Specify 09-487 x length (118, 114, 138). Handing will a...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series