Why does the outside lever retract the latchbolt and deadbolt on the Vandlgard mortise lockset?
The LV9000 lock cases must be completely installed on the door to be tested properly.
The mounting posts act as a stop for parts inside the lockcase and when not inserted thru the lockcase...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage
Which Thumbturn is used with the Schlage L9000/LM9200 Escutcheon Inside Occupancy Indicator?
The Escutcheon Trim Inside Occupancy Indicator uses the Standard ADA Thumbturn shown below with the 09-544 ADA Thumbturn for Sectional Trim.
This applies to Occupancy Indicator Option...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can the LV/LMV9000 be ordered less complete trim?
Due to the functionality of the LV/LMV lock, less complete trim is not offered....
Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What is the Schlage 30-120?
The Schlage 30-120 is an FSIC Cylinder used to operate the L/LV9485 and L/LV9486 Faculty Restroom Locks. Note when ordering: The Cylinder is handed.Emergency keys and Control keys must be or...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What is the clearance between the 09-611 Chevron indicator and the A rose?
The clearance between the 90-611 Chevron indicator and the A, B or C rose:A rose (2-1/8 dia) clearance is approximately .5"B rose (2-9/16 dia) clearance is approximately .28"C rose (2-5/8 dia) clearan...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Can I buy the Dust Cover part number L583-749?
The Dust Cover L583-749 is used in place of the RX Switch to cover the opening at the bottom of the lock case. This part is listed in the L Series Service Manual but is not sold separately. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Can I order the L Electrified Motor assembly, part number L283-680?
The L9000 Electrified Motor assembly part number L283-680, is listed in the L Series Service Manual but is not available as a part. The complete lockcase must be purchased....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can I bench test an LV9000 Mortise with Vandlgard trim?
The Vandlgard lever trim uses unique mounting posts/ferrules that interact with parts inside the lock case. The lock won't operate correctly without the lever trim fully attached and mounted in a door...
Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series