Category: LV9000-Series

(Results from 41 to 50)
Description of the 09-633 inside escutcheon with Thumb Turn and lever or knob.
The 09-642 was an Inside Escutcheon w/ ADA Thumb Turn 09-544 for N escutcheon, no lever/knob included. This was listed for a short period of time in the Pricebook and Service Manual. The 09-548 ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
How many degrees of lever rotation for latch retraction on a Schlage L9000 Mortise Lock?
The amount of lever rotation needed is approximately 45 Degrees....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What is the L9000 Key Override Feature?
This optional feature allows the outside key to retract the deadbolt and/or latchbolt, overriding the inside thumbturn when it is being held in the locked position.  This option is integrated int...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
How to convert the L9462 to L9463?
To convert from L9462 to L9463, replace the inside keyed mortise cylinder on the L9462 with the 09-904 mortise thumbturn housing, specify finish, length, and handing. ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Can the 41 or 42 knob be ordered with an LV function?
Knobs are not available on the Vandlgard functions for the LV9000 series mortise locks. The Vandlgard feature was designed to combat abuse, specifically using force on a rigid lever to attempt to...
Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What are the dimensions for the Deadbolt and Latch Cutouts in the L/LV9000 Armor Front?
Please see drawing below for dimensions of the cutouts for Deadbolt, Auxiliary Latch and Latchbolt used on the L/LV9000 Armor Front. The material thickness is .039".  Note: Not all Arm...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Do both levers clutch on the LV9482 ?
Both levers on the LV9482 use the Vandlgard function to rotate freely down, but neither will retract the latch.   ...
Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Do both levers clutch on the LV9082?
Both levers on the LV9082 utilize the Vandlgard feature to rotate freely down, but neither will retract the latch.    ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Which Door Template should I use for the Schlage L/LV9081function?
You can use the same Template that's listed for the L/LV9080 Function. The actual Template number will depend on the Trim Style and Door Material chosen. Click here for the Template Index.&nbs...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Why does the outside lever retract the latchbolt and deadbolt on the Vandlgard mortise lockset?
The LV9000 lock cases must be completely installed on the door to be tested properly.  The mounting posts act as a stop for parts inside the lockcase and when not inserted thru the lockcase...
Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series

Support by product