Category: LV9000-Series

(Results from 21 to 30)
Why does my LV9000 lock case have a yellow handing sticker and not an orange handing sticker?
The LV9000 handing process was redesigned.The yellow vandlgard sticker were placed on lock cases manufactured after 06/03/2019.The orange vandlgard sticker were placed on lock cases manufactured befor...
Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What is the part number for the new handing set screw for the LV9000 Vandlgard locks?
The new style Vandlgard flush handing screw is available in the L283-615 screwpack....
Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
When did the L Series change to an new ADA Thumbturn?
Effective December 9, 2019, Schlage L Series mortise locks requiring a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing ADA design w...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200 | Schlage Commercial
Is the Schlage Full Size Interchangeable core available less logo?
To specify a Schlage FSIC less logo, order the 23-031....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LM9200
Can you add the RX option in the field with the Electrified vandlgard mortise lock?
Due to the RX switch being installed inside the lock case, the switch cannot be installed in the field. Locks must be ordered from the factory with the RX option. ...
Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Does the Electrified LV RX option require handing in the field?
Handing of the RX switch is not required....
Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
When did the LV9000 Electrified Vandlgard become an available option?
This product launched on 04/03/2020....
Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
How do I change the handing on a Schlage L9000 mortise lock?
In order to change the handing, one or both of the following steps should be followed: Pull out the latch and rotate 180 degrees Handing screw must be installed on the interior side ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Does the Allen head handing screw sit flush when fully installed?
The Allen head set screw will need to be threaded all the way to the head when installing.  The head of the screw will be slightly below the case surface.       ...
Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
What size is the Allen Head Screw on the LV9000?
The size of the Allen Head screw is 5/64”.     ...
Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series

Support by product